Alternative Betriebssysteme für NOKIA IP265 gesucht...

#1 Da ich noch eine ungenutzte Nokia IP265 herumliegen habe und die nicht unbedingt als Briefbeschwerer nutzen möchte, suche ich ein alternatives Betriebssystem das ohne Fehler bootet.
Vorhandener CF Slot und optionale Platte bieten sich ja gerade dazu an...

Altbekannt bei mOnOwall und/oder pfsense ist ja folgendes:

F... E... D... C... B... A... 9... 8... 7... 6... 5... 4... 3... 2... 1... 0...
Nokia Baja bootstrap loader, Version 2.02
Copyright (c) 1997-2005, Nokia, Inc.
Baja motherboard type 5981, Manu. Rev 9, Board Rev 1
CPU Id 0x06B0 stepping 4, Rev 0, L2 Cache 256KB
512MB SDRAM memory
DIMM 0 256 MBytes, Single Sided DIMM 1 256 MBytes, Single Sided
THIS MACHINE HAS NOT YET PASSED MANUFACTURE-TIME DIAGNOSTICS
pci0: probing for devices:
pci0: device 0/0 found (Intel 82815E Host-Hub bridge, type 0x11308086)
pci0: device 1/0 found (Intel 82815E AGP bridge, type 0x11318086)
PCI-to-PCI bridge found
pci0: device 30/0 found (Intel Hub interface to PCI bridge , type 0x244E8086)
PCI-to-PCI bridge found
pci0: device 31/0 found (Intel ICH2 LPC Interface bridge, type 0x24408086)
pci0: device 31/1 found (Intel ICH2 IDE controller , type 0x244B8086)
pci0: device 31/3 found (Intel ICH2 SMBus controller, type 0x24438086)
pci1: (connected via pci0) probing for devices:
pci2: (connected via pci0) probing for devices:
pci2: device 0/0 found (Broadcom 5823, type 0x582314E4)
pci2: device 1/0 found (TI 1250 PCMCIA, type 0xAC55104C)
PCI-to-PCMCIA bridge found
pci2: device 1/1 found (TI 1250 PCMCIA, type 0xAC55104C)
PCI-to-PCMCIA bridge found
pci2: device 2/0 found (Intel 82559ER, type 0x12098086)
pci2: device 3/0 found (Intel 82559ER, type 0x12098086)
pci2: device 4/0 found (Intel 82559ER, type 0x12098086)
pci2: device 5/0 found (Intel 82559ER, type 0x12098086)
Loading kernel from BIOS_BOOT
Loading master boot sector...
Transferring control to the master bootstrap loader...
/
FreeBSD/i386 boot
Default: 0:ad(0,a)/boot/loader
boot: Consoles: internal video/keyboard
BIOS drive C: is disk0
BIOS 640kB/523264kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root@mb62.neon1.net, Sat Dec 9 17:20:01 CET 2006)
/kernel text=0x480ac8 data=0x99954+0x324d0 syms=[0x4+0x59ba0+0x4+0x7050a]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p10 #0: Tue Jan 15 20:11:29 CET 2008
root@mb62.neon1.net:/usr/src/sys/i386/compile/M0N0WALL_GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 400MHz (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 67502080 (64 MB)
avail memory = 39915520 (38 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <processor> at device 0.0 (no driver attached)
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x80010000-0x80010fff irq 11 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: bad Vcc request. ctrl=0x400, status=0x30000206
cbb_power: 0V
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x80040000-0x80040fff irq 11 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0x3040-0x307f mem 0x80080000-0x80080fff,0x800a0000-0x800bffff irq 5 at device 2.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0x3080-0x30bf mem 0x800d0000-0x800d0fff,0x800e0000-0x800fffff irq 6 at device 3.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559ER Embedded 10/100 Ethernet> port 0x30c0-0x30ff mem 0x80110000-0x80110fff,0x80120000-0x8013ffff irq 7 at device 4.0 on pci2
miibus2: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> on miibus2
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp3: <Intel 82559ER Embedded 10/100 Ethernet> port 0x3400-0x343f mem 0x80150000-0x80150fff,0x80160000-0x8017ffff irq 9 at device 5.0 on pci2
miibus3: <MII bus> on fxp3
inphy3: <i82555 10/100 media interface> on miibus3
inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)


Fatal trap 9: general protection fault while in kernel mode
instruction pointer = 0x70:0x6cb3
stack pointer = 0x28:0xfd0
frame pointer = 0x28:0x169
code segment = base 0xc00f0000, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 0, gran 0
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 9
panic: general protection fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort

usw.....

Irgendjemand eine Idee? Vorschläge? Inputs?
Danke im vorraus!


__________
Nokia Checkpoint IP-256 // Cisco PIX 506E // Phion Syntegra XS // Sonicwall PRO300 // Sonicwall DMZ // Sonicwall SOHO // D-Link DFL-200 // Netgear FVS114 and many many more...